I mentioned above that when using my Epson sublimation printer I have not had success printing directly onto the EasySubli paper. These are the issues I’ve had:

Other brands of sublimation inks and printers may work, but they will require trial and error testing. Siser has partnered with Sawgrass to develop special inks and a profile for the greatest print quality with the least hassle. You already know Siser® Glitter HTV can be sublimated, but what if you want to spare yourself the sparkle? Siser has the sublimation solution for you! Now offering, EasySubli®, the matte heat transfer vinyl that’s receptive to sublimation inks! Siser EasySubli HTV is the key to decorating colored polyester (excluding sublimated polyester garments) and cotton blends. Never be limited to white polyester again when you switch to EasySubli! EasySubli HTV can be applied at a lower temperature (311) vs traditional sublimation temperatures of 400 for a lesser amount of time Now before you go out and buy up the whole lot, there’s a few more things we recommend having on hand to achieve best results with EasySubli HTV. EasySubli HTV Companion ProductsRemove the protective sheet and locate the sublimation design on top of the EasySubli. Use heat-resistant tape to hold the print in place and then add the protective paper over the top of the sublimation print and use heat-resistant tape to hold it into place. Press at 385 degrees for about 30 seconds. When you’re done remove everything from the top while it’s hot. Finished EasySubli with Epson Sublimation Print To use Siser EasySubli with printers that aren’t Sawgrass, I have another option that works well and eliminates the problems that I’ve run into below. EasySubli Printing Issues

Siser EasySubli is different than regular sublimation paper and HTV. Depending on the sublimation printer you have, you can print directly onto the EasySubli surface or you can use it as a base HTV to apply a sublimation print to. These last few items are likely already in your craft arsenal, but were necessary to complete this project: Here’s my shirt after pressing with this method. These colors aren’t exactly what I had intended. The original file is more pastel, especially the lighter colors, and the greens are quite a bit different. It’s okay, it still looks great.

Do you want to add the selected products to your shopping basket?

Upload your .jpeg or .png file and select “Simple”, “Moderately Complex”, or “Complex”depending on the level of detail in the image. For the printed image, I am printing on regular sublimation paper with my sublimation printer using sublimation ink.

The rollers on the EcoTank printer especially are so close to the printed area that I end up with roller marks. First, there are are two different products here - they are complimentary but it's important to understand that they can be used together or independently. Also compatible with the Sawgrass Virtuoso SG800 (SG800 discontinued for SG1000) desktop sublimation printer.This is good because, again, your garments are not under heat and pressure for an excessive amount of time, possibly damaging them. But, perhaps even better, you’re saving tons of time doing transfers in half the usual time!