Polar Blast can be used at various dilutions depending on the density of foam desired. A good starting point is 100ml product to 500ml water in your foaming bottle. Adjust foam gun settings as required to increase or reduce foam.

Autoglym Polar Blaster - Ultimate Snow Foam Gun Kit

Screw the Foam Gun Head (B) onto the Polar reservoir bottle (D) and attach the Polar Blaster to your pressure washer lance. As mentioned above, most users will apply their snow foam through a specific lance attachment for their pressure washer. These aren’t always universal, so make sure you choose one that’s compatible with yours. They usually have a bottle into which you’ll pour the snow foam concentrate. And depending on the size of your car, this may need to be refilled several times.There are a number of other Snow Foam comparisons and tests on DW, which test the various snow foam dilutions, pre-rinses etc etc. For this review, I followed the instructions to the leter to see if it worked well as intended.

Autoglym Polar Blaster - Ultimate Snow Foam Gun - GBR

In summary the product has been developed to work neat through to 1part Polar Blast to 10 parts water. We have been very happy with the product performance diluted at 1:5. Using snow foam is our favourite way of pre-washing your car. Not only does it look like your car has been hit by a blizzard, but it also helps to lift away embedded bits of dirt that regular shampoo sometimes struggles to lift (think bird poo, tree sap and overspray). You don’t even need a particularly powerful pressure washer, a budget pressure washer will still be good enough. Flush through the Polar Blaster with clean water when you have finished using it to apply all intended products. Dilute the product at the recommended rate, outlined on the sidewall of the Polar reservoir bottle (D). Spray Polar Wash onto the vehicle, starting at the bottom, ensuring all exterior surfaces are covered, including glass and wheels.Bauer Consumer Media Ltd, Company number 01176085; Bauer Radio Limited, Company number: 1394141; Registered office: Media House, Peterborough Business Park, Lynch Wood, Peterborough PE2 6EA and H Bauer Publishing, Company number: LP003328; Registered office: The Lantern, 75 Hampstead Road, London NW1 2PL Uneconomical compared to rivals. Have to use 200ml in the average snow foam lance compared to most commonly 100ml of rivals. Once the Polar product has fed through at the desired level, begin applying to your car in accordance with the relevant Polar Series product instructions. The adjustable spray pattern allows you to easily follow your car€™s contours, ensuring total coverage and appropriate dwell time on mud, traffic film and other contaminants.

Autoglym Polar Blast Snowfoam Review | Trusted Car Products Autoglym Polar Blast Snowfoam Review | Trusted Car Products

One of the strongest cleaning snow foams we have used to date. Clearly lifted soiling and made removal of soiling significantly easier. Polar Seal is a very protective coating that has been specially formulated for application through a pressure washer with a foam gun. It imparts a hydrophobic layer onto paintwork that causes water to bead on the surface which reduces the time it takes to dry the vehicle. Simply spray onto a clean, wet surface, rinse off and dry to leave behind a durable, high gloss finish. Features & Benefits: No bother. I have a pump sprayer that's around 2.5 - 3 litres, so will see how the foam comes out. I'll take a few pics too.If your vehicle only has very light soiling and you are using in place of shampoo. Please rinse vehicle first before applying Polar Blast. You can either allow to dwell and rinse without agitation or agitate with a sponge or wash mitt prior to rinsing.

snow foam lances for better car cleaning - Parkers The best snow foam lances for better car cleaning - Parkers

Every snow foam is a little different, but in essence they’re all pH-neutral cleaning solutions that, as the name suggests, will cover your car in a dense white foamy layer. You cover the car from tip to toe – including glass, plastic trim and the wheels – and leave it to do its work. How long depends on the instructions, but is usually somewhere between five and 15 minutes. Enough for a cup of tea, in other words. This really is dependent on several factors including the level of foam you would like to achieve, the settings of your pressure washer and the hardness of water in your area. Spray Polar Blast onto the vehicle, starting at the bottom, ensuring all exterior surfaces are covered, including glass and wheels.

GearWrench 72-point Ratcheting Wrench Set Review

It’s a fine snow foam for any car, but an absolute winner for larger 4x4s and vans. Just be warned that the 200:1 recommended dilution seems to refer to the overall amount of water running through the pressure washer rather than the amount you should pour into the attachment. At anything below 20:1, you won’t get the required foam.